Images May Not be Vehicle Specific. For Display Purposes Only.

SPC Race Style Upper Control Arm - Build Your Own UNIVERSAL

Brand: SPC Performance | Category: Control Arms

Fitments

UNIVERSAL
92002 Build Your Own Control Arm
Ball Joint Plate
Chrysler Screw In Plate
Use w/ Ball Joint 94002
Angle 10deg
92003 Build Your Own Control Arm
Ball Joint Plate
Chrysler Screw In Flat Plate
Use w/ Ball Joint 94002
Angle 0deg
92004 Build Your Own Control Arm
Ball Joint Plate
Full Size GM Bolt In Plate
Use w/ Ball Joint 94004 Standard
92005 Build Your Own Control Arm
UCA End Pivot Stud (Cross Shaft End)
92006 Build Your Own Control Arm
Ball Joint Plate
Midsize GM Metric Bolt In Plate
Use w/ Ball Joint 94006 Standard, 94017 Extended
Angle 0deg
92007 Build Your Own Control Arm
Ball Joint Plate
GM Tri 5 Bolt In Plate
Use w/ Ball Joint 94003
92008 Build Your Own Control Arm
Ball Joint Plate
Midsize GM Metric Bolt In Plate
Use w/ Ball Joint 94006 Standard / 94017 Extended
Angle 20deg
Position Left
92009 Build Your Own Control Arm
Ball Joint Plate
Midsize GM Metric Bolt In Plate
Use w/ Ball Joint 94006 Standard / 94017 Extended
Angle 20deg
Position Right
92010 Build Your Own Control Arm
Right Hand Jam Nut
Size 3/4in - 16
92011 Build Your Own Control Arm
Left Hand Jam Nut
Size 3/4in - 16
92013 Build Your Own Control Arm
Pivot Plate Stud w/Nut
92014 Build Your Own Control Arm
Offset Pivot w/Bushing
92019 Build Your Own Control Arm
Lock Nut for 92014
92021 Build Your Own Control Arm
Race Kit
Threaded studs, lock nuts, bolts, jam nuts, offset pivots
w/ Delrin Insert
Includes 2 Each
92025 Build Your Own Control Arm
Racing Pivots
Material Delrin
92040 Build Your Own Control Arm
Adjusting Sleeve
Length 3-3/4in
Material Steel
92045 Build Your Own Control Arm
Adjusting Sleeve
Length 4in
Material Aluminum
92050 Build Your Own Control Arm
Adjusting Sleeve
Length 5in
Material Steel
92055 Build Your Own Control Arm
Adjusting Sleeve
Length 5in
Material Aluminum
92060 Build Your Own Control Arm
Adjusting Sleeve
Length 6in
Material Steel
92065 Build Your Own Control Arm
Adjusting Sleeve
Length 6in
Material Aluminum
92080 Build Your Own Control Arm
Adjusting Sleeve
Length 8in
Material Steel
92090 Build Your Own Control Arm
Adjusting Sleeve
Length 9in
Material Steel
93400 Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 5in
Shaft Material Steel
93410 Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 5-1/2in
Shaft Material Steel
93420 Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 5-7/8in to 6in
Shaft Material Steel
93430 Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 6in Slotted Mount
Shaft Material Aluminum
93440 Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 6-1/2in
Shaft Material Steel
93450 Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 6-5/16in
Shaft Material Steel
93460 Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 6-11/16in
Shaft Material Steel
93470 Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 6-15/16in
Shaft Material Steel
93480 Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 7-3/4in
Shaft Material Steel
93490 Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 5-7/8in Tri-5
Shaft Material Steel
94013 Build Your Own Control Arm
OE Style Bushing Only
94014 Build Your Own Control Arm
Street Pivots
Material Clevite
94041 Build Your Own Control Arm
Street Kit
Threaded studs, lock nuts, bolts, jam nuts
w/ OE style offset pivots
Includes 2 Each
94100 Build Your Own Control Arm
Adjustable Upper Control Arm
Complete Cross Shaft Assembly
Includes 2 Straight Pivots
97100 Build Your Own Control Arm
Hi Strength 2 Piece Rod End
Size 3/4in -16 LH

Product Description

These fully adjustable, rugged arms are recommended for circle track, road racing and drag applications. They allow the user to adjust the arm length and offset to attain the ultimate suspension geometry required to reach the winner’s circle. Each arm can be adjusted up to 2” in length and all components are interchangeable and may also be ordered separately.

Step Number 1
Measure Cross Shaft Bolt Hole Spacing From Center-To-Center

Step Number 2
Measure Length of Control Arm – Measure from the middle of the cross shaft to the center of the ball joint.

Step Number 3
Determine Type of Ball Joint Plate

  • Full Sized GM Truck Bolt In Ball Joint Plate Measure center-to-center between the ball joint bolt holes that are farthest apart. This measurement should be 2-3/4” SPC Ball Joint part number is 92004.
  • GM Metric (Midsized) Bolt In Ball Joint Plate Measure center-to-center between the ball joint bolt holes that are farthest apart. This measurement should be 2-1/2” – SPC Ball Joint part #92006. Also in 20° – SPC Ball Joint part #92008 & 92009.
  • Chrysler Screw In Ball Joint Plate – SPC Performance offers ball joint plates that are welded flat (0°- SPC part #92003) or at an angle (10°- SPC part #92002) for these screw in type ball joints.